As the need for the long life, LED products should be under good design, good material, good technology. Similarly, the composition of the product by the LED and other components of good design, good components and materials, a good process.
To make real long life, low power consumption, less maintenance purposes. To use the at the same time of LED lamp (t8 led replacement lamps) beautify the environment, do not forget the the the the impact of of the non-performing products right the environmental safety Xing. If it is not enough working voltage, or the operating voltage is too low there will be light does not shine bright enough, if the supplier may be leakage, you can the QT1 test IR curve to determine the brightness and wavelength with lead-free production, the LED is not a requirement time and temperature in the wave front furnace can withstand lead-free, LED is limited, world-class LED can only withstand high-temperature impact of three seconds to five seconds, the wave front dip tin temperature over 260 degrees.
LED lights and the lower limit of the upper limit of the LED lights are significant differences. In this situation, in general more difficult to control. LED lights (t8 led replacement lamps) are more vulnerable.
1. Damaged by environmental factors
The lamps will be installed on the roadside or on bridges are subject to different vibration impact, the source of vibration from passing vehicles, especially in the past overloaded vehicles. When the lamp is a component or somewhere with an external source of vibration resonance, will produce components or circuit damage.
The lamps will be installed on the roadside or on bridges are subject to different vibration impact, the source of vibration from passing vehicles, especially in the past overloaded vehicles. When the lamp is a component or somewhere with an external source of vibration resonance, will produce components or circuit damage.
2. Damage caused by human
When the lamps are within people's reach, they would often be damaged by some people intentionally or unintentionally pressing, shaking, beating, or damaged by the collision of the objects in the handling.
When the lamps are within people's reach, they would often be damaged by some people intentionally or unintentionally pressing, shaking, beating, or damaged by the collision of the objects in the handling.
3. Use of the product safety issues
The above analysis of various unfavorable factors will cause a certain degree of damage to the use of LED products (t8 led replacement lamps) , which in turn damage of LED products will also affect the surrounding environment. This public environment will cause a potential security problem.
The above analysis of various unfavorable factors will cause a certain degree of damage to the use of LED products (t8 led replacement lamps) , which in turn damage of LED products will also affect the surrounding environment. This public environment will cause a potential security problem.
没有评论:
发表评论